YOGI EXPORTS
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to YOGI EXPORTS
Injection Molding Machine
We offer Injection Moulding Machine from L&T (Larsen & Toubro) INDIA, which is one of the Biggest Group Company in India.
Under Plastic Division L&T manufacture Plastic Injection Moulding and Auxiliaries like, De-Humidifier, Hopper Loader and Hopper Dryer etc.
The Machines are of German Design and also they have own R&D Department for implementing latest Technology.
- S-Tech Series Injection Moulding Machines
These Machines are cost effective Machine with LNC5 Controller. S-Tech Series is presently available in lower and medium tonnages from 600 kN to 2750 kN for parts weighing from 20 gms to 1500 gms. S-Tech is ideally designed to meet the process requirements of a variety of molding jobs that require optimal performance with a reasonable initial investment. S-Tech derived from the proven De-Tech series of Machines, S-Tech encompasses all the benefits of unified design
- De-Tech Series Injection Moulding Machine
De-tech is the entry level closed loop machine offering the best value for money. The De-tech machines have a computer optimized 5-Point Twin toggle clamping mechanism that offers good kinematics and secure the molds while clamping. The Injection units have a modular selection to enable you opt for the right machine for your molding requirement. The LNC5 control offers the molders with an assortment of options and features that make your molding a pleasure. De-tech machines are best suited for entry level moldings and mass productions with reduced cycle time requirements and for those operations that require returns in a short time. De-tech machines comes in a variety of sizes ranging from 40T to 650T and shot weights from as low as 21 gms to 6.5 kgs
- Ace GenXt Series Injection Moulding Machine
Ace is a precision, high quality Injection Moulding Machine. The Ace GenXt machine series is perfectly matched to user needs in the clamp force range from 400kN to 10,000 kN. With modular options for injection unit, screw, pump rating and drive. The specifications are enhanced better level of accuracy and also shot consistent, with powerful 5-point double toggle, ugged machine construction, and an ergonomic operator interface. The modular and ergonomically design enhances economy, reduces maintenance costs, set-up time, and spare parts stock requirements, and makes operation more efficient and safer. And it is a proactive concept capable of coping with upcoming new challenges
Blow Molding Machine
We offer Blow Moulding Machine from Central Plastic Machinery and Products which is famous all over world with Brand Name of CMP. CMP is the Best Blow Moulding Machine Manufacturers in India. The Machines are High Output & Fast Production Machines with or without De-flashing systems. CMP has wide range of Machine and the beauty is, for smaller products smaller capacity machines are available. The Capacity of Machines are from 50 ml to 20 Ltr and option for Single and Double Station with Single and Multiple Head.
The CMP De-Flashing Systems are a modular compact design. The extruder, hydraulic and pneumatic systems are console and unitized, making it exceptionally easy to customize the machine to meet your exact needs. In De-Flashing Machines automatic scrape removal inside & outside the mould for bottles, wide neck articles and jerry cans with handle, using push contact, blow pin scrape trimmer or circular cutter with removal grippers
Silent Features
- Fully Automatic
- Continuous Parison
- Simple to Operate
- More Versatility
- Great Reliability in Production
- Infinitely Variable Speed A.C. Drive with High Output
Selection Options
- Double Head
- Bobbing Extruders
- Viewing Strip Machine
- Hot Wire Cutter
- Bottom Blowing System
- Angular Blowing Attachment
- Multi Point Parison Control
- Extruders with Bigger Screws
Leak Testing Machine
For Commercial Leak Testing of Containers from 100 ml to 30 Ltr with Consistency and Accuracy for Premium Quality Assurance. The Leak Detector provides accurate Medium High Speed Leak Detection in a Versatile Machine with easy Controls.
The heart of Machine is a proven high performance Micro PLC Controller with flexible software in that allows the machine to be tailored to required need.
The unit incorporates screen that show all the vital operating parameters on the display and an innovative menu system to access other parameter and options.
Silent Features
- Fully Automatic
- A.C. Variable Speed Motor
- Options of Multi Testing Heads
- Digital Transducer Technology with two set points
- Rejection with Alarm
- Adjust to any conveyor and container Type
- Modular Design
Pet Stretch Blowing Machine
We offer PET Stretch Blowing Machine from Famous Brand 'Global PET'. The 'Global PET' Machines are two stage, linear type blow moulding machines with simple and unique design. It uses combination of Pneumatic and Hydraulic versions for better and fast quality output. Robustness and long lasting service of component are protected by mechanical and electrical safety systems. Constant quality of bottle production is based on the precision repetition of heater control and stretch motions. Preform carries and blow cells are easily changeable allowing product versatility. The main function of start up operation are combined on the machine integrated LCD Control Panel. Trouble Storage can be accomplished by accessing the LCD Display Screen, Programmed to assist the Operator in evaluating machine conditions. Multi Security devices insure the safety of operators and protect the machine.
The wide range of Machines as per output requirements. Mainly Two Types of Machine like, Fully Automatic PET Stretch Blowing Machines and Semi Automatic PET Stretch Blowing machines.
Semi Automatic PET Stretch Blowing Machine (Preform to Bottle / Jar)
Wide range of Machines for Bottles and Jar of 50 ml to 20 Ltr with One and Two Cavity Machines. Also machines for Cold Filling and Hot Filling. Production output from 400 Bottles (Jar) Per Hr to 700 Bottles per Hr.
Also Machines available for Higher Output options of Two Blow + One Conveyor and for specific shape of bottles Auto Drop Machine.
Features
- Built –in Philips automatic microprocessor.
- High quality cylinders and valves are standard equipments of the machine.
- Pressure adjustable valve controls the high pressure blowing air.
- The valves controls the pressure of the compressed air, excessive air is vent out through a silencer.
- Machine maintenance, testing and production have manual and semi auto mode.
- Genuine parts are used to enhance machine file.
- One conveyor can have maximum two blowing machines.
Injection Moulds
|
Plastic Mixers
|
Fully Automatic Pet Stretch Blowing Machine
Wide range of Machines from 500 ml Bottle till 5 Ltr Jar, One Cavity, Two Cavity and Four Cavity Machines. Production Output from 1000 Bottles / Hr to 4000 Bottles / Hr.
Silent Features
- Compact Design for Space saving
- Specially developed ejector and loading arms
- Special hydraulic valve for fast mould opening/closing
- High quality valves, cylinders for trouble free production
- Philips 16 Bid –XAG-49 PLC
- Hydraulic Clamping system for better quality bottles.
- In built self diagnostic function will display fault areas with cause and remedies to ensure hassle free production.
- Recall memory up to 40 parameters setting.
- High sensitive sensors are provided for safety of machines.
- In built cooling system for neck cooling, mould cooling and oil cooling.
- Auto –feeder for perform to reduce man power.
- Specially designed hopper storage to hold 150 kg. Performs which ensure at least 3 hours of continuous production.
Hot fill PET Bottle Moulding Machine
It is well known that the Pet Bottles are commonly used in mineral water and carbonated soft drinks for years due to its excellent properties in transparency, Gas Barrier and dimensional stability.
To cope up with the growing demand in non carbonated drinks such as fruit juices, cold tea, sauces; we have introduced our new technological upgraded, innovative blow moulding machine for hot fill applications.
The Pet Bottles with heat setting treatment which can be hot filled, are widely produced by axial oriented stretch blow moulding process. Through this process, toughness, strength and gas barrier properties are further enhanced in addition to the light weight and aesthetic improvements in the blown bottles.
Features
- High oil circulation system manifold.
- High pressure blowing manifold for chill air unit.
- Chilled air unit through inside stretch rod for after blowing.
- For high pressure blowing using.
- For chilled air Parkar Lusifer Valve Swizz made upto 25 Bar.
- Machine maintenance, testing and production have manual and semi auto mode.
- Specialized Heaters with directional counting for better heat transfer.
- In built cooling system for neck cooling.
- In built pipe line to control the temperature of mould by just attaching mould temperature controllet.
Technical Advantages & Specifications
- The HF series of machines are two stage, biaxial type stretch blow moulding with simple and unique design.
- The machine contains France make Toshiba Heaters with closed loop heater and one side is white coated for two modules. Penetration - Heater preform thickness 4mm, each module is 8 heaters, total number of heater is 16 nos., Heater capacity is 1.5 kw each, total capacity is 24 kw.
- Preform indexing speed is variable type.
- Provosion to set movement for individual heater.
- Neck cooling system to avoid neck deforming.
- Special programme in P.L.C. System for Hot filling.
- Multiple security devices insure the safety of operators and protect the machine.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
